Product Description

This is a ready-to-use primer for bituminous membranes, produced by mixing water and bitumen using special techniques.

Application Areas

It is used as a priming coat before the application of all brands of bituminous membranes. With its superior adhesion properties, it ensures a stronger and gap-free surface bonding for the membranes applied over it.

• Suitable for both horizontal and vertical surfaces.

• Can be used in enclosed areas such as basements and cellars.

Surface Preparation

The application surface must be free of dust, rust, dirt, grease, and oil.

• Loose particles should be removed.

• Sharp edges and horizontal-vertical joint areas prone to cracking should be smoothed out.

• Large pores and cracks should be filled with a suitable repair mortar.

Application

• The product is ready to use.

• It can be applied with a bitumen brush, roller, or spray gun.

• Dries within approximately 4-5 hours, depending on weather conditions.

• Should not be applied during rainy weather or when temperatures are below +5 °C.

Precautions

• Protect the product from freezing while in the package.

• Keep out of reach of children.

• Always protect your eyes and skin while working with any chemicals.