Application Areas
It is applied on all concrete surfaces and ground structures requiring exterior insulation in both horizontal and vertical directions, as appropriate. Foundations, shear walls, retaining walls, basements, structural elements in constant contact with water and underground, terraces, parking lots, wet volumes, and flowerbed waterproofing are safe applications for this material. It is secure for critical detail solutions because it is applied without creating joints.

 

Usage Areas

• Building foundations

• Basement floors and walls

• Retaining walls

• Tunnels and channels

• Closed roofs and verandas

​

Advantages

• Its flexible structure bridges cracks in concrete

• Resistant to freezing and thawing

• Contains no solvents, environmentally friendly

• Resistant to aging, water, salt solutions, and weak acids

• Provides a simple and cost-effective application

• Can be applied with a brush or trowel

 

Surface Preparation
The surface to be applied should be cleaned of dust, dirt, rust, and oil, and any loose particles should be scraped off.
To ensure good adhesion, apply a coat of BITWAT ASTAR on concrete surfaces and ICF Derz Dolgu Macunu on metal surfaces as a primer before application.
Sharp edges should be rounded, and areas prone to cracking, such as horizontal/vertical joints, should be reinforced with  Bituminous Pah Tape.
Large pores and cracks should be filled with ICF Derz Dolgu Macunu.

 

Safety Instructions

Harmful to skin. May cause serious eye damage. Keep out of reach of children. In case of eye contact, rinse immediately with plenty of water and seek medical assistance. Appropriate protective gloves and goggles must be worn during application.